Русский

Inquiry    Service

Navigation Menu
Menu
Home > News

Products

Mobile Crushing Plant

Crushing Plant

Screening & Washers

Feeding & Conveyor

Complete Crushing Plant

Things to note when using a vibrating feeder

<

In the production process, the vibrating feeder can feed block and granular materials from the storage bin to the receiving device evenly, regularly and continuously. In the sand and gravel production line, it can feed the crushing machinery continuously and evenly and perform coarse screening on the materials. The vibrating feeder has a simple structure, reliable operation, convenient adjustment and installation, light weight, small size, and convenient maintenance. When a closed structure body is used, dust pollution can be prevented.

During the use of the vibrating feeder, there will be some common problems, such as slow feeding, etc. The main reasons for the slow feeding of the vibrating feeder are as follows:

  1. The inclination of the chute is not enough

Solution: Adjust the installation angle. According to the site conditions, choose to raise/lower the fixed position of the two ends of the feeder.

  1. The angles of the eccentric blocks at both ends of the vibration motor are inconsistent. We need to check whether the two vibration motors are consistent and then adjust them.
  2. The vibration direction of the vibration motor is consistent. At this time, it is necessary to adjust the wiring of any one of the vibration motors to ensure that the two motors run in reverse and ensure that the vibration trajectory of the vibrating feeder is a straight line.