News
Correct operation steps of toothed roller crusher
Time: 2021-05-28
2. Pay attention to the verticality between the main body and the horizontal when installing.
3. After installation, check whether the bolts at various parts are loose and whether the door of the main engine is fastened. If so, please fasten it.
4. The red star of the toothed roller crusher is equipped with a power cord and a control switch.
5. After the inspection is completed, a no-load test run is carried out, and the test run is normal and production can be started.
6. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing, it directly affects the life and operation rate of the machine, so the injected lubricating oil must be clean, the seal must be good, and the toothed roller type The main oil injection point of the crusher machinery (1) rotating bearing (2) roll bearing (3) all gears (4) movable bearing and sliding plane;
7. The newly installed wheel tyres are prone to loosening and must be checked frequently;
8. Pay attention to whether the various parts of the toothed roller crusher work normally;
9. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time;
10. On the plane of the bottom frame of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents;
11. If the bearing oil temperature rises, stop and check the cause immediately to eliminate
12. If the rotating gear is running, if there is an impact sound, stop and check it immediately and eliminate it
